Jump to content

AmericaMonster

Members
  • Posts

    501
  • Joined

  • Last visited

Everything posted by AmericaMonster

  1. Petrol or Diesel? R48 seems to function as a temperature sensor inside the thermostat. If this fails, the ECU may be unable to determine the appropriate values, however I would have expected it to still start.
  2. Fuel type: Petrol or Diesel; what is the vehicle's mileage? The manual will indicate the position of the fuses. Has any maintenance been performed on the vehicle previous to the starting issue? Preliminary considerations suggest insufficient fuel pressure; nonetheless, it is essential to conduct a diagnostic scan for fault codes. Can you arrange for it to be retrieved to a garage? If it was serviced by Mercedes in the last year, you will own Mobilo breakdown coverage.
  3. They produced several units of these; they are almost identical to the 2.0 in all respects, with a standard 8v M102 engine.
  4. Engage the gear and provide a forceful push, shifting it slightly forward before attempting to start the engine again (out of gear, of course!).
  5. Ensure that the selector transitions into the park position correctly before initiating the start, if it is automated. Perhaps consider posting a little video clip? 🙂
  6. Have you seen the "similar threads" about the Viano/Vito that are just under this one? They discuss an air conditioning line delivering refrigerant to the evaporator under the fuse box and issues arising from a retaining clip. To what extent do you engage in do-it-yourself activities? Could you allocate around thirty minutes to disassemble and inspect? The skill level seems to be rather basic, and the tools required seem to be minimum.
  7. Mercedes air conditioning The evaporator in the dashboard emits a hissing death rattle sound when the gas pressure diminishes. If the noise is really this, it may not indicate a problem with the dashboard, which would be advantageous.
  8. The weight difference between the ML and the CLS SB is barely 10%, hence it is unlikely that there would be any issues. To the best of my knowledge, if the diameters and offsets are similar, the wheel dimensions should also be identical, resulting in them being the same. I will determine the similarity of the wheel bosses' thickness by comparing a wheel bolt from the CLS with a wheel bolt from the ML. If the bolts have the same length, it would suggest that the wheel bosses are of same thickness. With the exception of forged wheels, which are distinct, the sole difference between AMG and non-AMG wheels is in their design; they are all manufactured using the same method, as far as I know. There is one minor difference in addition to the offsets: the ML wheel bolts are fastened at 150 nm, whilst the CLS is fastened to 130 nm. I am curious about the reason for it, and does it have any significance?
  9. Actually, the wheels are fairly wide - measuring 9.5 inches. Although I have a preference for the others, I would not be considering replacing them if the tires on the vehicle were not deteriorated.
  10. The 2007 ML63 did not come with staggered wheels as standard equipment, as stated in the Owner's Manual produced in 2006. My vehicle also does not have staggered wheels; instead, it is equipped with AMG VI wheels measuring 9.5 x 19, which are similar to the rear wheels of the CLS model but with a slightly different offset of 2mm. Curiously, the staggered-setup rear wheels offered by Alloy Wheels Direct are all 9.5 x 19 in size, with a 56 mm offset.
  11. I share the same opinion; both the clothes and the automobile are outdated, and I am as well...
  12. I am OK with the 19" wheels since I do not need a stiffer ride, and I believe they are proportionate to the W164 model. I also have a preference for simple wheels. I am not fond of intricate designs and find the wheels often used on modern electric vehicles to be unattractive. I favour a minimalist and elegant style; I believe that simplicity is more impactful. I plan to install these:
  13. If I decide to retain the ML63, which seems probable, I believe it would be advisable to replace the wheels - authentic AMG, measuring 19 x 9.5J with a 46mm offset (previously refurbished once, but the quality of the refurbishment looks subpar based on their appearance and the amount of weight required to balance them). They are not available fresh from any source, save for a single wheel in Poland, priced at about £600 - I am not interested. In terms of style, they are satisfactory, but they do not possess any exceptional qualities according to my own preferences. I am inclined to install a set of four non-AMG tires, namely the same ones that are already on the back of my CLS. I have a strong preference for these tires, even above any of the other AMG alternatives for the 164 model. The dimensions of the wheels are 19 inches in diameter and 9.5 inches in width, with a 48mm offset. I am sceptical about the significance of a 2mm change in offset; does anybody have any contrary information?
  14. Who is doing the ATF service? I would be glad if the location is SPR in Stockport. They upload films on YouTube showcasing a variety of workshop tasks, and he demonstrates great attention to detail. I am not aware of any individuals that do a gearbox flush as part of their gearbox service. If you own the 7-speed gearbox, the price is reasonable.
  15. The battery does not have the responsibility of managing the Stop/Start function. That is mostly a software function. If the Stop/Start function has not been functioning properly in the past, it is likely due to the gradual deterioration of your battery until it ultimately failed.
  16. It is plausible that this might be the underlying reason, and I find it astonishing that a skilled technician would not have inspected all the pulleys, idler wheels, and tensioners for any issues prior to installing a new belt. The crucial aspect of it is the word "competent"!
  17. I believe it was an unexpected proposal to consider flipping the loom over. However, it is important to note that the individual coil connections are designed to be particular in length from back to front, so it would be unlikely for them to be mis-wired on each bank. Nevertheless, if the loom could be inverted, this possibility should be explored. Uncertain about the other components included in the loom portions that supply the coils - if there are connections for other equipment, it is quite improbable, but it does provoke curiosity!
  18. It is not expected to see a spark on the inflow valve. Both valves should be closed, and the plug leads should be connected in the right sequence.
  19. The dealership might provide you with information about your predicament. However, I am sceptical since the r171 and r172 are distinct vehicles. Are there any components such as suspension or mechanical parts that are compatible with your car?
  20. If you exceed the appropriate size, the calliper will not be able to fit.
  21. Take a look at this, my friend. https://www.cleanyourcar.co.uk/das-6-v2-dual-action-polisher
  22. On the r230, fully open the trunk and then click the red button. This will cause the roof to elevate, facilitating the loading process. To shut the roof, ensure that the separator is in the closed position and then hit the red button once again.
  23. Make sure to elevate the boot to its maximum height. If it is not fully elevated, the simple pack function will not operate.
  24. An easypack refers to a kind of packaging that is designed to be simple and convenient to use.
×
×
  • Create New...