Jump to content

AmericaMonster

Members
  • Posts

    501
  • Joined

  • Last visited

Everything posted by AmericaMonster

  1. It may be sporadic until it becomes consistently operational, I suppose. Utilize new AdBlue if the existing supply is older than about 12 months.
  2. I assume you are referring to the NOX sensor.
  3. If I get this accurately, the tire unit lacks awareness of its location; instead, the ECU determines it based on the signal's reaction time. In such scenario, exchanging wheels laterally and longitudinally should have no effect. I had not previously considered this, since all my automobiles prior to the BMW used ABS sensors to monitor the rolling radius for tire pressure discrepancies.
  4. Clearly, the vehicle is aware of the positions of its wheels, such as front right and rear left; but, do the wheel sensors possess the intelligence to recognize this and retain that information? Do they not just report pressures, regardless of their location?
  5. The reflectors/projectors are likely incapable of accurately focussing the beam pattern. The illumination differs between the two bulb kinds. As already said. Technically, the conversion you have executed is not legally valid.
  6. I have observed damage to the loom. Previously, the vehicle exhibited severe roughness, and the auto electrician identified damage to one of the injector feeds. I will call him tomorrow and persuade him to come out. I appreciate your counsel.
  7. I have encountered that issue previously, but I cannot identify any apparent cause.
  8. The fob battery has had its protective film removed; I am already aware of this, can you surmise how? The main battery and auxiliary battery both exhibit a satisfactory 12V reading, and the fob battery has been verified at 3V. I am unable to test the primary battery under load for amperage, but that is irrelevant if I cannot start the engine. I have also inspected the fuses and relays.
  9. Both fresh batteries are completely charged. The fob fails to open the doors, although it engages the ignition switch; nonetheless, no dashboard lights illuminate.
  10. 2013 CLS 250 model. Sat for 14 minutes. Both batteries are depleted and have been changed, along with the fob battery. I utilised the mechanical key to unlock the vehicle; but, the ignition does not respond when I insert the fob. Is there a reset procedure to enable the fob to recognise the vehicle and vice versa?
  11. Thank you. The issue is that I am reliant on specialists; I am unable to remove the tire to access the bead. I could purchase a secondhand wheel, inspect the rim and then have the tyre replaced.
  12. I own a 2006 C200 W203 with 84,000 miles on the odometer. I have had an issue with the rear tire maintaining pressure. It would decrease by around 1 pound daily. I replaced the worn rear tires with Michelin CrossClimate. To my astonishment, the offside tire continues to lose pressure. The business remounted the tire, nevertheless it continues to leak. Do alloy wheels develop porosity? Is this issue resolvable? How is that the case? Any assistance would be much appreciated.
  13. Who is the tire manufacturer? My vehicle was equipped with Continental 5 P tires, and the ride quality might have been improved. I switched to Goodyear Assi 5, resulting in a more controlled and pleasant ride.As others have said, it will never resemble a limousine. Mercedes does not recommend altering tire dimensions. Your vehicle ought to possess staggered tires; nonetheless, the wheels are of uniform size. I attempted to increase the rear tire size on my vehicle, but saw a change in handling and promptly reverted to the appropriate size. I really regret no longer own my automobile. I trust you will resolve the issue.
  14. Did they remove the tiny paper disc located on one side of the battery during the battery replacement? It is a frequent occurrence to overlook.
  15. The Mercedes Me app is unreliable, and some versions use 3G, which is being deprecated. Regarding the Squib. I would not feel comfortable using a pre-owned component in a safety-critical domain. I would entrust it, along with the airbag removal, to a qualified Mercedes-Benz technician. πŸ‘
  16. It will be positioned much lower than the air filter housing. The sensors are often located at the junction of the engine and gearbox. Typically at a really uncomfortable location!
  17. I consistently maintain the roof either up or down during the duration.
  18. That aligns with my reasoning. πŸ˜πŸ˜‹
  19. I utilise AutoDoc, however I consistently possess the MB reference in advance. I subsequently locate the matching component from AutoDoc. In my situation, the dampers were Sachs, but Bilstein would have sufficed.
  20. I have used it to transfer music files to the hard drive and to refresh the navigation maps.
×
×
  • Create New...