Lemmand

Is it necessary for the task to be completed by the dealer? If you choose to engage with a trustworthy independent firm, you have the opportunity to get a completely assembled motor.

The Mazda User's handbook contains detailed information on the driving assistance systems, including any accompanying terms and conditions. I discovered that the cruise control radar has the potential to incorrectly detect an empty flatbed truck or a motorbike. Although it has not occurred to me so far, I must be prepared to assume control in the event that day were to arise.

Was the 18-wheeler travelling at a speed of 50 mph, as I anticipated? It may have seemed that the vehicle was obstructing your path, even if it was not really doing so. The cruise control system likely uses a fusion of radar and camera signals. The radar is unable to detect lane markers, although the camera has the potential to do so. However, in some occasions, lane markers could exhibit signs of fading. An automated system may not easily detect the presence of a semi-truck in your route. Please consider my answer with scepticism, since I lack any knowledge of the underlying workings of Mazda's adaptive cruise control system and have only made conjectures.

Is it possible to exchange the wife instead? Merely jesting, naturally. This is an excellent illustration!

The outcome is contingent upon the specific inspections conducted and the equipment used. During the diagnostics check, it was found that the flow rate was suboptimal. However, it turns out that two of the injectors were malfunctioning. It is standard procedure for garages equipped with a specialised diesel flow metre to do this task before proceeding with any other actions. If the injectors are found to be defective, my garage advised me to replace all of them, since replacing just two would need returning in a month to replace the other ones. Fortunately, in your situation, that is not the case. The cost of each new injector, excluding work, is estimated to be around £220. Furthermore, I strongly advise against purchasing any 'refurbished' items, as they are often deceptive and not worth the investment. This information comes directly from a Volkswagen technician who deals with such products on a daily basis. An unmistakable indication, in the event that you must make a purchase, is when the merchant requests that you surrender your previous item. When purchasing new items, you should never be required to provide the old ones. Regardless, this discussion is just theoretical; presumably, the solution is simple.

Although that may be a misleading clue, have you verified the functionality of the injectors? I inquire, since I have lately had a similar issue with my VW Golf. The engine would have intermittent jerking and harsh idling, often resulting in stalling. There are no illuminated indication lights on the dashboard. After having the performance assessed, it was determined that 2 out of the 4 injectors exhibited anomalous behaviour, indicating the presence of a potential issue. I had to face the difficult situation and replace all four. The issue was subsequently resolved.

Despite many attempts to bleed the system, my CDI 270 engined Jeep remained unable to start. Injecting a brief burst of easy start into the intake while revving the engine results in it starting within seconds. In my opinion, the pumps fail to provide sufficient pressure upon starting the engine due to the presence of air in the lines. It is advisable to refrain from excessive cranking if the engine does not start, since the diesel fuel running through the pumps serves as their only lubrication.

Based on your previous experience, did you have any difficulty with the axle being firmly attached to the knuckle? Did they readily separate? The problem with that tool is that I believe I need to insert it into the wheel studs in order for it to function. I assure you that all of the wheel studs are totally damaged. I am unable to attach the tool to my studs. I intended to purchase an electric pneumatic hammer to facilitate the detachment of the axle from the knuckle. However, I am uncertain if the components will be firmly glued together. Being in New Orleans, there is no rust present. I am optimistic that it will be easy to disassemble. I have no inclination to purchase new axle shafts. It will incur a significant additional expense.

Now, my only task is to replace each knuckle unit without the need to concern myself with detaching the hub from the knuckle, a process that requires many specialised equipment. I am concerned about the process of removing the CV axle from the knuckle, since the text indicates that it requires specialised equipment. Evidently, it is a frequent occurrence for the axle and knuckle to get fused together. I will address this issue as it arises. Regarding the front air struts. How can I determine whether my car is equipped with the higher-priced continuous damping system?

Thank you for all the advise. To save time, I purchased pre-assembled secondhand knuckles and hubs. Approximately $100 for each corner on eBay. All components were sourced from an L322 model with far less kilometres than my own vehicle.

Indeed, I am aware that the rear air bags are distinct from the shocks. Are you suggesting that things are very resistant to bullets? Regarding the front, my intention is to do a complete assembly, including both the shock and the airbag.

Additionally, what is the estimated duration for this repair? I am uncertain about the methodology for determining the estimated time required to replace a wheel hub. If it doesn't need a significant amount of time, I will likely take it to my independent mechanic to handle. I anticipate that this work will be very exasperating due to the absence of both an impact tool and an air hammer.

Essentially, the prior owner used the wrong lug nuts, resulting in every wheel bolt being totally stripped and irreparably damaged. As far as I know, the only solution to fix the damaged studs is to replace each complete wheel hub. The component number for the front hub is LR023978. The component number for the rear hub is LR012741. I will need to dismantle the whole suspension system in order to access these hubs. Therefore, I believe it is a suitable opportunity to renew the suspension components, as far as I am aware, they have never had maintenance. The mileage on my vehicle is 125,000, and it still has the air struts that were originally installed. I intend to substitute: The wheel hubs of all four wheels. All four air struts Replacement of all four brake pads and rotors What other items should I substitute while I am there? I presume that the necessary components for repair would include control arms, bushings, and tierod ends, among other related parts. As a novice in suspension, I find the many pieces to be somewhat perplexing. I expect this repair to be challenging for me, mostly due to the lack of available threads or information online on this task. The book states that I will need many specialised instruments, however, all of these items are now unavailable for purchase, and their collective cost amounts to almost $1000. Has anybody successfully finished this task and can suggest more affordable instruments that are effective for doing it?

Here is the resolution. LOL https://www.harborfreight.com/1300-lb-capacity-self-loading-positioning-wheel-dolly-64601.html

Undoubtedly, someone, at some point, will need an engine for one of these.

Obtaining a WBAC type quotation independently is a simple task, however it is probable that the price will be reduced to some extent throughout the evaluation process. The scrap value will be little. In my opinion, you would likely get the most value for it by creating a truthful advertisement as said before. Perhaps list it for a price range of £500-1000 and assess the response. Potential buyers can always submit offers, and you are aware of the minimum value based on quotations from scrap or WBAC.

Actually, the correct names for such models are EP6 1.6 VTi and 1.4 VTi. It is understandable to make such a mistake.

I assume that the end cap may have been installed incorrectly, as I have seen others making this error in the past. If this is really the case, you may consider acquiring a Peugeot or Citroen engine, since they are identical to the one in the Mini and tend to be more affordable. I have come across fully functioning vehicles being sold for as little as £300 due to either being out of MOT or having a broken gearbox.

Yes, it is indeed the same. The torque converter flywheel plate may be installed on any crankshaft. However, it is important to remember to place the timing ring on the end of the crankshaft before reattaching the flywheel. Failing to do so would require repeating the whole process.

Indeed, the sensors in question were original equipment manufacturer (OEM) Huf sensors. This set of wheels and sensors is new, whereas the others remain in the other wheels. I performed the installation without writing any code. I inserted them and let the system sufficient time to identify and acknowledge their presence. Covered a distance of less than 20 miles.

It is intriguing that after installing the replacement wheels, the issue was cleared in less than 20 kilometres. As far as I remember, there is no explicit programming on them.

Last month, I purchased a two-year insurance policy for my "C" class vehicle at a cost of £713.00.

I will be utterly astonished if it is not the hedgehog.

Update - The attempt to resolve the issue by bringing it to the Mercedes dealer was unsuccessful. On their first try, they imposed a diagnostic cost of £140 and informed me that they had updated the 'Software' to fix the air suspension problem, as well as the issue of the default units constantly resetting to kilometres. I was given a guarantee that both problems were unequivocally resolved by the software upgrade. With a sceptical mindset, I drove the vehicle away and made a brief stop at a store. However, upon returning, I saw that the suspension had failed. In addition, the units persistently default to km. :mad: I spoke with the service manager and he agreed to bring the vehicle in again for further diagnostic tests on both problems without any additional cost. Their recent diagnosis indicates that the reason for the suspension falling is indeed the recently acquired and installed air compressor. I questioned the reasoning for attributing this activity to the non-Mercedes dealer component, considering that the vehicle displayed the same behaviour even when equipped with the original factory-installed compressor. However, their explanation did not provide a satisfactory answer. I rejected the proposal to spend over £1k on replacing the fully functional (and just purchased!) compressor. Wouldn't the defective unit have difficulty lifting the vehicle upon starting if this was actually the case? Apparently not. In addition, they have determined that rectifying the problem with the default units will need a software upgrade costing £140. Me - Are you referring to the software update that you previously installed, which did not resolve the issue? Mercedes - No, sir. The recent upgrade was specifically for the suspension problem, and it included modifying the software. I am referring to the software update that failed to address the suspension problem and was also supposed to repair the issue with default units, but did not succeed. Mercedes - I'm sorry, but this is a separate software upgrade that will cost £140. I rejected their kind offer and chose to get the automobile myself. On a positive side, they are always polite and attentive. Additionally, I was pleasantly surprised to see that my vehicle had been meticulously cleaned and the tyres had been treated with a glossy substance. However, my satisfaction was short-lived as I opened the door and the metal sill plate fell to the ground. It seems that they used excessive force with a pressure washer on the sill, causing the removal of all the glue. It appears that they lack the ability to effectively and methodically diagnose a problem in order to identify the underlying cause of failure. Instead, they rely on the fact that their customer base primarily consists of corporations who prioritise quick problem resolution over the number of random parts that are replaced in the process. I am now searching for an autonomous Mercedes expert in the East Midlands region. Does anybody have firsthand experience with MB Centre in Nottingham?

For those who are interested, here is an update... The compressor and valve body have been replaced, nevertheless the issue of collapse persists. 😟 I have made an appointment with Mercedes Derby for them to identify the problem and provide me with a permanent solution.