
HolyRoach
Members-
Posts
178 -
Joined
-
Last visited
Everything posted by HolyRoach
-
The device will not explode in close proximity to your face. To safely connect the two little pins, you need to attach a 12-volt power source and a ground connection. The pins contain contacts that automatically short-circuit when the plug is withdrawn. Deliberately setting off an explosion would need a very focused and determined endeavour. Never by accident!
-
Once the airbag is removed, you will be able to reach the screws that secure the shifting paddles. Once the paddles are removed, you can access the screws for the switch block.
-
I have exchanged a few switch packs. Attempt to clean it little beforehand. Based on my own experience, those buttons are often the most frequently used ones in the group.
-
Indeed, it is correct.
-
Simply get it remapped with an EGR deletion.
-
Are you referring to the resonator version for performance or the straight x pipes version for racing? I am unfamiliar with this technology, but based on my speculation, I would assume that the latter option would produce a higher volume than the Kline inconel. Nevertheless, my concern would be the potential loss of the exceptional resonance produced by the Kline inconel system.
-
I have never personally had a vehicle mapped. No speeding citations have been issued in the last 50 years of driving. I had previously had an issue with a V12 Jaguar that I own, since its maximum speed was limited to 154mph, contrary to my initial expectation of 155mph. The speed limit in this region remains unchanged at 70mph.
-
Avoid doing this unless you want to permanently leave a mark on your automobile.
-
2014 red Spyder I am searching for black seats with red accents that are easy to get out of due to previous hip surgery. I want to avoid any impediments at the bottom of the seat that may hinder my ability to exit the automobile. Although it may seem peculiar, it is what I am aiming to get. Frankly, I don't want to spend exorbitant sums of money either. Some of you may have luxurious chairs, but I prefer not to spend too much money. I am uncertain whether my aspirations are feasible.I am interested in exploring other options to replace my dull black chairs. If I couldn't locate anything, I would be OK with that outcome as well.
-
Thank you. I will attempt them. I am unable to get a quotation from Churchill or Direct Line, who are part of the same firm, since their website freezes.
-
Impressive! I believed that mine was elevated... My quotation from Aviva is £485, and I will get £45 payback via Quidco.
-
Hello everyone. It's time to refresh once again. The insurance premium for my vehicle, a 22 plate 'S' rear-wheel drive, has increased from £363 to £575 with no claims made. Has anybody improved while competing against one of the major companies? Cheers
-
Who manufactures the wheels? A set might cost as much as $20,000.
-
Upon recently viewing this discussion, I have noticed that I own analogous crease marks on my driver's seat, much like the original poster (OP). I see it as an inherent reality, uncertain of any potential actions one may take? I will maintain the cleanliness of the inside by regularly vacuuming and wiping it down.
-
Which engine should I choose for the C63 - the M156 or the M177?
HolyRoach replied to CleverPixel's topic in General
Regarding track performance, the M156 engine is very powerful and has an ethereal and fiery nature. The process continues incessantly, continuously progressing without any inclination to halt. The vehicle has the ability to consume bumpers off a Porsche 911 turbo. It has the potential to instill a great deal of fear in others, particularly when navigating tight turns. The sight of smoke emanating from the rear tyre and flames being expelled is very remarkable when seen in rewind. If you have a sensation of being a decade younger and get pleasure from visiting amusement parks with children, then m156 is an excellent choice. Although I lack personal experience with the 4.0l, my friends will provide you with an abundance of positive feedback. I really like this film; it is quite captivating and exhilarating. -
Very well, I will provide a response. I am completely unaware of the problem at hand. However, I have provided a response!
-
I am now using a 330e F30 vehicle. I also get free charging at my workplace. I encounter a few problems, but they are within the expected range for a typical automobile that has been used and aged. The 2.0-liter engine exhibits rapid acceleration and has enough torque while operating in petrol mode. Therefore, you have obtained the optimal combination of both aspects. Initially, I didn't pay much attention to the electric aspect of the automobile. I do not pay any taxes, and the cost of insurance was affordable at that particular moment, so I would take it into consideration.
-
Procedure for removing sticky residue from the headlight switch panel
HolyRoach replied to VodScanner's topic in General
I am certain that you departed somewhere between the hours of 9 and 10 o'clock. -
Unfortunately, it is regrettable that they are unable to apply it to all the windows and the front screen. It would eliminate the need for me to always wear a sack over my head while driving.
-
Ziinsig - Laughter! I adore this! I am consistently pleased that other drivers are unable to see my children's sporadic gestures towards them. No matter how often I instruct them to cease their peculiar behaviour, they persist in doing so!
-
Despite its apparent darkness, the glass on your side and rear windows will have a factory tint rather than a film. Here is mine (apologies for the BMW emblem!).
-
Indeed, the glass comes with the hue directly from the manufacturer, without the need for an additional film application.
-
In my opinion, it seems that the windows have been tinted, and based on their appearance, they are now in violation of the law. The front windows must have a light transmission rate of at least 70%. Use the Juke behind as a reference for comparison.