
Radiantecon
Members-
Posts
271 -
Joined
-
Last visited
Everything posted by Radiantecon
-
The back cable seems OK; however, the bolted connection inside the battery compartment was rather soiled, which I have since cleaned. The engine bay side seems acceptable. Is there a method to test the cable for potential faults?
-
Measured from the positive terminal to the engine bay grounding point on the left side. I believe a weak connection between the rear battery and the engine compartment. I also investigated potential grounding issues but only examined the engine to chassis ground strap owing to the onset of darkness and cold weather.
-
It may be prudent to include the codes retrieved from the vehicle; I sense that they are likely irrelevant and only indicative of improper power distribution to the automobile. | Identifier | Current Status | Detailed Description |-------------------------------------------------------------| | 1A2002 | Intermittent | Electric fan activation: Short circuit to ground | | 1A2004 | Intermittent | Electric fan activation: Open circuit | | 1A200D | Intermittent | Electric fan function: Communication fault | | CD8E12 | Intermittent | LIN message: Alternator missing | | 0DA451 | Intermittent | No message received (actual steering torque driver actuator 10.0.0) | I conducted a physical test of the electric fan at full AC load. The fan operated well, and I noted that the fan activation percentage on the reader fluctuated in line with the readings.
-
Greetings everyone, Recently had an issue with the car failing to start, initially seen a few weeks ago. Due to my lack of initiative, I assumed the battery was not retaining charge and changed it, resulting in a £200 error. After extricating myself from bed in the evening to do some diagnostics, I believe I have identified a power supply problem. Here is a summary of the symptoms I am experiencing. The car began the other day, remained idle overnight, and successfully started in the morning. After a brief drive, it failed to start five minutes after being turned off, with the battery reading 12.45 volts. The vehicle begins operation with support from an auxiliary battery via the front jump terminals. The alternator measures 14.5 volts. Current drain when the vehicle is off (not in sleep mode). 70 milliamperes The push-to-start mechanism produces an audible relay click. The IBS sensor has been removed, still the engine fails to start. The voltage measurements taken under load and straight from the battery in the trunk yielded the following results: 12.6 volts while turned off, 12.5 volts with ignition on, and 12.2 volts when cranking. When measured from the front jump ports: 11.6V with ignition on, 0.4V while cranking. Relocating the battery from the rear compartment to the engine block and trying to initiate the start using jumper cables produced a repeating clicking sound reminiscent of a machine cannon. I am led to assume that the positive wire from the battery to the engine compartment is defective. Conversely, I believe that the battery connected to the front jumps should have started the automobile. Any recommendations or additional aspects to evaluate would be highly appreciated. I like a challenging problem, but this one is overwhelming me.
-
My 7 Series exhibited similar behaviour when one of the level sensors on the rear suspension arm was inverted, resulting in an incorrect height reading and the vehicle attempting to compensate. The adjustment took five minutes to elevate the back and reposition the level sensor linkage in the opposite direction. I trust it is something as straightforward as this for you.
-
What, no Basil jokes being presented?Wink
-
I cannot speak on the ethics of your local garage; but, regular brake strip inspections and servicing for brake life are now obsolete. If they emit unusual sounds or exhibit abnormal behaviour, they need care. Rear disc brakes exhibit a degree of fragility and are susceptible to partial seizure if not regularly maintained. This will result in premature and irregular wear, contingent upon the type of the seizure. Mileage is inconsequential, since infrequent usage may potentially exacerbate problems.
-
No information is available about an advised restriction on brake pads. Perhaps if he is aware that it is being taken in for servicing, the garage will identify them? Ultimately, some individuals will complain if they get advice. Believing they are only seeking employment.
-
https://www.gov.uk/guidance/mot-inspection-manual-for-private-passenger-and-light-commercial-vehicles/1-brakes#section-1-2-1
-
It is possible that they have not been completely released. A comprehensive brake service may be necessary.
-
A minimum of one cap. If yours is absent, you must a replacement nonetheless. I possess no knowledge about the AL tanks, save from the fact that they are available for purchase. I have never used one.
-
The cap should remain secured. It alleviates pressure at around 21-22 psi. It should not displace the threads on the bottle. Purchase an authentic Mini brand reservoir cover and see whether it continues to overflow. Coolant systems need appropriate pressure; otherwise, they may vaporise at temperatures lower than specified.
-
This testing kit includes an adapter compatible with a 2nd generation mini. Amazon Canada I purchased one around six months ago, and it includes a lid that fits the coolant container. I do not own a cap tester; however, I circumvented this limitation by removing the coolant reservoir from the vehicle, sealing all openings save one, and then pressurising the whole reservoir while submerged in the septic sink. Confirmed that the cap detached at the appropriate pressure and that the coolant reservoir exhibited no leaks concurrently. One must sometimes engage in unconventional thinking.
-
Purchase one of the little "sniff tester" kits. Remove the cap and use it to extract the air from the coolant reservoir. Colour change in the fluid of the sniff tester indicates the presence of combustion gases in the coolant, suggesting potential issues such as a head gasket failure or head fractures. If there is no colour change, the engine is mechanically sound, and the cap has likely deteriorated. That is only a cap replacement problem. While more issues may arise, this approach will begin the process and represent the most cost-effective method to address the prevalent problems initially.
-
What are the methods to get maximum acceleration from the G20 320i?
Radiantecon replied to Adv3nture's topic in General
Additionally, remove that box. -
What are the methods to get maximum acceleration from the G20 320i?
Radiantecon replied to Adv3nture's topic in General
I first believed this when I acquired my M4, which was mostly used for derivatives. Currently, I rev my M4 to 7,000 RPM, but it is capable of exceeding that by a few hundred RPM.Notably, reaching the maximum RPM in fourth gear will propel me above 130 mph.I consistently utilise paddles or the DTC shifter/gearknob while accelerating. -
Thank you for your reply. Similar to your experience, I have encountered the shift to nighttime mode, especially when driving under bridges. I had not contemplated modifying the automatic headlight control. I have elevated the dashboard illumination to level 20 (maximum), nevertheless it does not mitigate the issue I discovered. I am gradually understanding that the resolution to this problem is so profoundly concealed that only a Hyundai software expert can assist.
-
Thank you for your reply. The screen brightness adjustment in Settings/Display/Brightness does not provide choices for modifying the satnav; there is a notice indicating that the satnav is configured according to lighting conditions, but unfortunately, no adjusting options are available. I contend that there may be no resolution to this quite vexing event. The satnav is clearly visible in daylight or darkness; nevertheless, its clarity diminishes in gloomy conditions.
-
Thank you for your answer; I have reviewed it and provided my feedback below.
-
Thank you.
-
I should have specified that the vehicle is a 21-plate E Kona.
-
When the weather is somewhat cloudy, my navigation screen often switches to night mode. The cabin's illumination makes the navigation screen hard to view, especially in regions devoid of significant roadways. Has anybody else encountered this issue, and if so, have you discovered a method to modify the settings for the transition to night mode or any other solution? Thank you.
-
Isn't the 2017 Clubman an F54 model? I believed the last R55 was in 2015.
-
Rest assured, I will express my foresight when the appropriate moment arises, often with billies at around four months, and all the paint has corroded away. 😉
-
Opt for BCS; I have installed many sets on various vehicles without encountering any complaints or issues about the components.