LimeLing

In 2010, there was a transition to the smaller silver kind of sensor, therefore both styles of sensors might have been used at that time.

The banjo on the driver's side of the engine is located on the flange on the exhaust manifold, immediately above the joint with the turbo. Visible in this image

This is a typical issue caused by carbon blockage, resulting in unrealistic air mass to EGR codes. I have experience in installing pre-turbine pressure sensors. If the banjo is released, then you may thoroughly clean the pipe with a rod. If a cordless drill is used, an old bike brake Bowden cable may effectively transfer the carbon.

Issues related to the plausibility of air mass and errors in the exhaust pressure sensor, Essentially, it refers to the observation of a discrepancy between the intake of air and the pressure of the exhaust. There may be an air leak somewhere between the Mass Air Flow (MAF) sensor and the engine. It is advisable to inspect common areas such as the boost pipes, input to the turbo, and the breather hose. Additionally, ensure that the narrow steel tubing connecting the manifold to the pressure sensor is not obstructed. The vacuum sensor on the brake booster is designed for the stop-start system, therefore there is no need to be concerned about it.

I appreciate the information you provided. After completing this task, I restarted the system and the live services were restored. Do you have any insight on what may have caused them to cease functioning?

I have not performed a reset yet. Which reset was that? Is it possible to reset the Kia connect software in the car in order to refresh it, since I believe the problem is exclusive to my vehicle and not affecting a large number of cars. Upon reviewing my Kia Connect app, I discovered that the most recent connection to my automobile occurred on April 6th. I am uncertain as to the reason for its abrupt cessation.

Greetings, everyone. Is anybody else experiencing the same issue? Throughout the whole day, I have had a persistent unavailability of Kia linked services. There is no real-time navigation or route available. In addition, I have also examined the fuel stations and parking areas, but I have been unable to get any data from them as well. Will this be a matter to address directly with Kia? The Kia reception information is displaying the typical four bars indicating a strong signal, however there is no data connectivity. Appreciation is expressed for your kind gesture.

For the sake of future readers seeking clarification, it is worth noting that even after a period of two months, there has been no indication of any chassis warning or suspension issues.

Yesterday afternoon, I acquired a new relay and proceeded to install it. I am pleased to report that I have not had any instances of the body chassis warning or suspension descending since then. The duration of 24 hours seems to be much improved.

I retrieved the previous item, which had significant internal corrosion. I am able to shut the feed 12v, however the contact may not be sufficiently strong.

Thank you! I have placed an order for a new relay from BMW and want to test it upon its arrival.

Both sides of my rear air suspension entirely descend. The frequency of my visits to a dropped automobile is sporadic, occurring around twice per week. I removed the compressor, which was damp within, and proceeded to dry and sanitise it. Although the solenoid seemed reasonable, I proceeded to replace it as a precautionary measure. It was ineffective. The compressor will elevate the automobile to the appropriate altitude, hence I deem it acceptable. In addition, I changed the air springs, which did not exhibit any leaks. However, considering their longevity of 70,000 miles, it would be prudent to make another attempt. It has not been beneficial either. I am depleting my supply of thoughts for the next subject to test. The solenoid block seemed OK, nevertheless, it may be worthwhile to consider replacing it as well. What is the probability of both sides experiencing the same intermittent problem simultaneously and repeatedly? Is there anything more that is worth investigating?

I have seen them being placed in a first-generation model, and they are positioned at a considerable height. Customer's head is almost reaching the ceiling. He eliminated them.

I highly question if the cigarette lighter connector maintains an active connection with the battery after the ignition is turned off. However, I cannot confirm this without access to a CHR vehicle for verification.

Greatly valued! Thank you.

Greetings, everyone. I really wish that all individuals present in this chat room, including their families, friends, and loved ones, are now in a state of safety and good health, prioritising these aspects above everything else.🙏 I just acquired my ideal vehicle, a 2012 Spyder in Daytona Grey, which is in fantastic condition. The mileage is 15,000. What are the guidelines for using a trickle charger, including recommended frequency, duration, and seasonal considerations? Any knowledge or understanding would be beneficial. Anticipating the prompt resumption of work and normalcy in the near future.

Just a suggestion, but was it necessary to replace the throttle pedal potentiometer? Upon examination, it has been determined that they are distinct.

You have provided a response to your inquiry. If financial considerations are not a factor, then the M3 would be the most suitable choice.

Insurers have observed that novice drivers and rear-wheel drive (RWD) cars do not combine well due to the tendency of RWD cars to oversteer in rainy conditions.

I do not own a smart metre; instead, I have the antiquated black device with a rotating disc.

Fascinating...

Is anybody familiar with this? If you are, you understand.