Bleakerje

Wouldn't it be more convenient to arrive at Heathrow by air?

After conversing with the garage, they provided me with the assurance that Mercedes-approved vehicles undergo comprehensive inspections prior to being sold. Additionally, they told me that any potential issues would be detected during the diagnostic process. Although I am inclined to trust them, there is still some scepticism. The sound is incongruous to me, but it might be typical for Mercedes vehicles. I was seeking clarification or identification with the assistance of others on this site.

I appreciate your suggestion. Does timing chain noise persist consistently independent of the engine's temperature?

I took the vehicle for a trip this morning and listened to it both before and after. When the engine was not warmed up, I did not perceive any sound. However, after returning from a trip of around 30 minutes, I noticed the presence of a clicking noise.

Does anybody else have any more ideas? I am interested in determining the specific component responsible for producing the noise and understanding the underlying cause.

Thank you for responding. The engine had a consistent sound regardless of its temperature, as far as I could discern. Indeed, the volume may have been intensified in the video due to the proximity of my phone to the engine. However, the noise is sufficiently enough to be audible even when the car's hood is closed and one is standing behind it.

Thank you for your response. Are you aware of the specific component from which it is originating? I have not had that issue with any of my previous vehicles, which were all equipped with 6-cylinder diesel engines.

Greetings, everybody. Thank you in advance for any thoughts or ideas. I have just purchased my first Mercedes vehicle and want assistance in discerning an unfamiliar sound emanating from under the hood, a sound that I have not encountered in my previous experiences with other automobile brands. This phenomenon occurs while the car's engine is in a state of idling and manifests as a distinct clicking or ticking sound, like the regular ticking of a clock every second. Should I be worried about this? What is the potential origin? If anybody is interested, I have captured the audio and published it to YouTube for anyone who would want to listen.

Returned promptly after a brief excursion 😞

Apologies. I apologise for any confusion in my previous message. The vehicle in question is a 2011 mk2 model. I believe the videos are of mediocre quality.

This is a second generation model from 2011. I suppose the videos are of the first generation.

Thank you. I will provide a concise explanation. Does the image correspond to the proper sensor?

Greetings, everyone. The service light on our Kia Picanto illuminated a few days ago. The codes suggest a potential problem with the CMP (Camshaft Position) sensor. Where is the CMP located on this? I presume it is positioned on the rear near the rocker, as indicated by the label "exhaust". Is it sufficiently straightforward to replace? ================================= OBD-II DTCs: 2 ---------------------------- P0340 [0x0340] The camshaft position (CMP) sensor A, bank 1 is experiencing a problem in its circuit. Confirmation received. Code P0014 The hexadecimal value [0x0014] represents a specific memory address or data value. The exhaust/right/rear camshaft position (CMP) actuator in bank 1 is experiencing timing over-advanced and system performance issues. Status: Awaiting resolution ============================ Electronic control moduleEngine control unit Diagnostic Trouble Codes: 2 ---------------------------- P0014 The hexadecimal value [0x0014] represents a specific memory address or data value. The exhaust/right/rear camshaft position (CMP) actuator in bank 1 is experiencing timing over-advanced and system performance issues. Status: The issue was confirmed to be existent at the time of the request. ---------------------------- The error code P0340 [0x0340] is displayed. The circuit for the Camshaft Position (CMP) sensor A on bank 1 is experiencing a problem. Status: Confirmed and saved in permanent memory. Confirmed fault detected at the time of the request. Confirmed fault has been present throughout this drive cycle. ============================ Transmission control unitThe gearbox control unit has detected 2 diagnostic trouble codes (DTCs). One of the codes is P0014 [0x0014]. The exhaust/right/rear camshaft position (CMP) actuator on bank 1 is experiencing timing over-advanced or system performance issues. Status: Fault confirmed at the time of the request. ---------------------------- Error code P0340 [0x0340] The circuit for the camshaft position (CMP) sensor A on bank 1 is experiencing a problem. Status: Confirmed and stored in permanent memory, Confirmed fault detected at the time of the request, Confirmed fault has been present throughout this driving cycle Is it located under the air filter housing?

Utilising adhesive for this purpose is rather prevalent. Alignment should not be a problem.

The gas cap cover seems to be made of metal and may be removed rather quickly (see to the link provided). Assuming that the finish is not a concern, this would simplify the process of powder coating. Due of the intricate nature of the form, wrapping may not be the most suitable choice.

Hasn't your automobile endured sufficient hardships?

Is that individual not biassed towards Toyota? Curious about his opinion on the Highlander PHEV?

Thank you, Liveek. Now, I believe that has resolved his issue.

I am uncertain if 51780 refers to a seal or a plate. Typically, when obtaining these diagrams, a list is also provided, specifying the component number. If the diagnostic information can be located on the Parts souq, it is likely that a written definition may be obtained. https://partsouq.com/en/catalog/genuine/pick?c=Kia&model=Passenger&ssd=%24%2AKwHT7__woLKjoK6yqrP5-v-ks9WmupvFi9nbz8Paxau-0cXJmsDLjZWCxNvC1cfF6wAAAAB4fp8M%24

Indeed, I am able to see that the diagnostic picture does not enlarge for me. However, with careful examination, I can deduce that it is identical to your previous photograph of the hub. (Y)

There are two component numbers, namely 52752 and 51752, assigned to the hub and rear hub cover, respectively.

Observe the central point on the diagram. Observe the numeral 52730A and go to the left, where it seems to be the cover.

Disregard the topic of shaving. Instead, consider growing a beard. However, I am curious in your method of urination and, if I may be frank, the act of shaking afterwards.

OVP is a dual integrated. Eighty-nine million seven hundred twenty-three thousand six Manufactured in Hungary Removed the black plastic from beneath the battery. Located the relay and removed it from its holder. Accessing the battery via the female connector proved challenging without removing it. Reposition it temporarily. Tomorrow, I will remove the batteries and worry about misplacing the Kenwood radio, since I do not have the code for it. Maybe I should get a relay, but not a Mercedes one since it could be costly, to take a chance that the issue lies with the relay. However, all indications suggest that removing the relay may deactivate the ABS warning light on the dashboard, as mentioned in a post located here.

Just opened the hood to have a peek. Passenger side battery. Black plastic cover is located behind it. The heater pipe located near the battery and cover is somewhat moist. There are two jubilee clips and some green discoloration present. Perhaps it is experiencing water loss, causing this region to become warm and moist. Refusing to assist with a relay 🙄 I often worry and get anxious in circumstances like these. As I am.