Barringer

The audio quality is acceptable. The construction concerns me. If it fails, I can just get a better one.

I am on the verge of making a purchase offer on a 2017 R8 that comes equipped with an aftermarket exhaust system. The manufacturer is Carrera. I reside in Mexico, and the vendor claims that the exhaust is manufactured in the United States. However, I am unable to locate any information on this exhaust product. If it were Akro from Fabspeed, I wouldn't be doubting it, but I've never heard of this brand. Does anybody know?

Intense lighting might be especially problematic while driving on uneven roadways. I have tried using yellow night driving glasses, but they proved to be ineffective.

Does the 2012 pre facelift model seem to be costly? For a little higher price, you have the option to purchase a facelift model, which has a noticeably more updated appearance.

https://www.ebay.co.uk/itm/115294237211?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=cBZi7LkPTfm&sssrc=4429486&ssuid=6nBfwGmuRC6&var=&widget_ver=artemis&media=COPY&mkevt=1&mkcid=1&mkrid=710-53481-19255-0&campid=5338181125&toolid=10001&customid=2518X1570512Xb10060afb459c933a172760def132f6a

Regarding the wiper blades for the R231 SL, I just purchased a set of these that were a perfect match, equipped with heating, and priced at a reasonable £70.

Indeed, I had contemplated pursuing a similar course of action. Please refrain from providing me any more encouragement.😄

Not entirely accurate, but quite close. I used a 76mm diameter version of this item, however I would certainly choose for a larger size if I were to repeat the process. Currently, I am experiencing persistent urges from my obsessive-compulsive disorder (OCD) to devise a method for aligning a bigger hole saw in the middle. However, I am currently fighting these urges.

I modified the scuttle panel by adding a rubber bung obtained from eBay to cover the brake fluid reservoir, allowing for easier access.

It is quite probable that this is the original filter. It is a challenging task, as you are aware, and Audi does not provide sufficient time for technicians to do it during a service, so they often neglect it.

To completely remove the glove box, you need to take out the felt trim piece, which is secured by many screws located beneath it. Regarding the sub, it does has studs and 3 nuts on the other side of the firewall. To reach them, it is necessary to remove the trim pieces located under the hood and in the front trunk. Once you have completed all the aforementioned tasks, I highly recommend replacing the cabin air filter. Since you have already gone through most of the necessary steps, it would be efficient to address this maintenance chore while everything is already disassembled.

Excuse me, but I have not done anything wrong.

As said, it does seem to be elevated. However, I don't want to dampen your enthusiasm. Regards, Dave's acquaintance. Stu has decreased it by 40mm. He may provide some pictures for comparison.

Glass will no longer be used due to two factors: polycarbonate is more cost-effective and lightweight, and it does not adversely affect pedestrian crash test outcomes.

I am uncertain, but I contacted them via phone and they informed me that they had discontinued distributing the product in both the UK and Germany. My Mercedes-Benz expert received the same information.

If they have Wahler, I may choose that option. Thank you!

I initially want to install a Mahle thermostat in my vehicle. However, when consulting my Mercedes-Benz specialist during the car's recent pickup, I was informed that they lack the expertise to install the thermostat in the housing, as they have only ever used original equipment manufacturer (OEM) thermostats with the housing. Autodoc offers Mahle products individually, however they do not have Mahle products with the corresponding housing.

Mercedes has discontinued distributing the thermostat for the E270 CDI. Therefore, it is necessary to place an order from Autodoc, since ECP only has the Starline brand available. Do you have a specific preference among Gates, Dayco, Metzger, and Febi Bilstein?